Accessories

KEY FEATURES

• For use with London fire brigade ZFB01 mortice dead lock

KEY FEATURES

• Suitable for use with escape lock

KEY FEATURES

• Dimensions: 225 x 196 x 75mm
• Compliant to EMC EN61000-6-1 & 3
• LED Indicators (mains, batt, output)
• Full current to load
• Switchmode technology
• Constructed in a modular arrangement
• 13.8VDC regulated output
• Additional battery charging
• Current limiting
• Short circuit protection
• Onboard tamper protection
• 230V fused input
• Multiple cable entry
• Allows for 1 x 9aH batteries

KEY FEATURES

• Dimensions: 225 x 196 x 75mm
• Compliant to EMC EN61000-6-1 & 3
• LED Indicators (mains, batt, output)
• Full current to load
• Switchmode technology
• Constructed in a modular arrangement
• 13.8VDC regulated output
• Additional battery charging
• Current limiting
• Short circuit protection
• Onboard tamper protection
• 230V fused input
• Multiple cable entry
• Allows for 1 x 9aH batteries

KEY FEATURES

• Dimensions: 310 x 340 x 80mm
• Compliant to EMC EN61000-6-1 & 3
• Full current to load
• 13.8VDC regulated output
• Switchmode technology
• LED indicators (mains, battery, output)
• Separate fused main connectors
• Full electronic protection
• Multiple cable entry
• Current limiting
• Additional battery charging
• Allows for 1 x 9aH battery

KEY FEATURES

• Dimensions: 200 x 200 x 65mm
• LED indicators for O/P, fault and mains
• Switchmode technology
• Multiple cable entry
• Cable retention points
• Ideal for hold open magnets and door closers
• Output can be fail-safe or fail-secure
• Dual inputs: external voltage or volt free
• Not to use with back up battery
• Full current to load
• 24-26VDC regulated output
• Short circuit protection
• Fused output
• Back EMF protection

KEY FEATURES

• Successfully fire tested to BS EN1634-1-2014 & BS 476: Part 22: 1987 (30, 60, 90 & 120 minute timber door-set)
• Dimensions: 295 x 60 x 32/57mm
• Allows adjustment and positioning
• Easy to fit and drastically reduces the installation time
• Simple to adjust magnet position
• No fixings required into the underside of transom
• Incorporates a cavity and cut out to make cabling easier
• Bracket to fix the transom
• 2 end guide channels for the plate to slide between
• Flat bar sliding plate to fix the magnet to
• Comes completely assembled

KEY FEATURES

• Successfully fire tested to BS EN1634-1-2014 & BS 476: Part 22: 1987 (30, 60, 90 & 120 minute timber door-set)
• Dimensions: 318 x 60 x 32/57mm
• Allows adjustment and positioning
• Easy to fit and drastically reduces the installation time
• Simple to adjust magnet position
• No fixings required into the underside of transom
• Incorporates a cavity and cut out to make cabling easier
• Bracket to fix the transom
• 2 end guide channels for the plate to slide between
• Flat bar sliding plate to fix the magnet to
• Comes completely assembled

KEY FEATURES

• Dimensions: 225 x 196 x 75mm
• Compliant to EMC EN61000-6-1 & 3
• Full current to load
• 13.8VDC regulated output
• Switchmode technology
• LED indicators (mains, battery & output)
• Separate fused mains connections
• Full electronic protection
• On board tamper protection
• Converts power more efficiently (switch mode)
• Multiple cable entry (inc. rear)
• Additional battery charging
• Short circuit protection
• Can house a battery up to 12V 9Ah

KEY FEATURES

• Dimensions: 124 x 32 x 43mm (Short Plate)
• Dimensions: 201 x 32 x 43mm (Long Plate)
• Ansi Style Electric Strike
• Use with access and door entry systems
• Holding force: 1500lb / 680kg
• 12VDC / 24VDC Selectable
• Current: 12V 280mA
• Current: 24V 140mA
• Suitable for metal / timber applications
• Fail Safe (Power to Lock)
• Fail Secure (Power  Open)
• Selected by adjustment at rear of unit
• Stainless Steel Plate (3mm Thick)
• Unbranded faceplates

KEY FEATURES

• Successfully fire tested to BS EN1634-1-2014 & BS476: Part 22: 1987 (30, 60, 90 & 120 minute timber door-set)
• Dimensions: 500 x 47 x 30mm (L Bracket)
• Dimensions: 250 x 50 x 55mm (Z Bracket)
• Specially designed bracket slots that allows for a simple one person installation of double maglocks
• L Bracket for use on outward opening doors
• ZL bracket for use on inward opening doors
• Anodised aluminium finish
• Fully adjustable brackets

KEY FEATURES

• Dimensions: 124 x 32 x 43mm (Short Plate)
• Dimensions: 201 x 32 x 43mm (Long Plate)
• Suitable for metal / timber applications
• Ansi Style electric strike
• Comes with short and long faceplate
• Short Plate: 124mm
• Long Plate: 201mm
• Use with access and door entry systems
• Holding force: 680kgs
• 12VDC/24VDC Selectable
• Current: 12V 280mA & 24V 140mA
• Fail Safe (Power to Lock)
• Fail Secure (Power to Open)
• Selected by adjustment at rear of unit
• Stainless steel plate (3mm Thick)
• Unbranded faceplates

KEY FEATURES

• Successfully fire tested to BS EN1634-1-2014 & BS476: Part 22: 1987 (30, 60, 90 & 120 minute timber door-set)
• Dimensions: 189 x 52 x 16mm
• Light and strong aluminium armature
• Multiple fixing holes for holding strength
• Supplied with fixing screws and armature securing bolt
• Removes the need to drill through the door
• The armature housing has been designed and fire tested to ensure that it retains the integrity of the fire door after installation
• Removes the requirement to drill through the door to install the armature plate

KEY FEATURES

• Successfully tested to BS EN1634-1-2014 & BS 476: Part 22: 1987 (30, 60, 90 & 120 minute timber door-set)
• Dimensions: 193 x 74 x 20mm
• Light and strong aluminium armature
• Multiple fixing holes for holding strength
• Supplied with fixing screws and armature securing bolt
• Removes the need to drill through the door
• The armature housing has been designed and fire tested to ensure that it retains the integrity of the the fire door after installation
• Removes the requirement to drill through the door to install the armature plate

KEY FEATURES

• Dimensions: 250 x 47 x 30mm (L Bracket)
• Dimensions: 250 x 50 x 55mm (Z Bracket)
• Fire tested to BS EN1634-1-2014 & BS476: Part 22: 1987 (30, 60, 90 & 120 minute timber door-sets)
• Specially designed bracket slots that allows for a simple one person installation of maglocks
• Fully adjustable brackets
• L Bracket for use on outward opening doors
• ZL bracket for use on inward opening doors
• Anodised aluminium finish

KEY FEATURES

• Fire tested to BS EN1634-1-2014 & BS476: Part 22: 1987 (30, 60, 90 & 120 minute timber door-set)
• Dimensions: 250 x 48 x 25mm (L Bracket)
• Dimensions: 180 x 46 x 46mm (Z Bracket)
• Specially designed bracket slots that allows for a simple one person installation of double maglocks
• Fully adjustable brackets
• L Bracket for use on outward opening doors
• ZL Bracket for use on inward opening doors
• Anodised aluminium finish

KEY FEATURES

• Successfully fire tested to BS EN1634-1-2014 & BS476: Part 22: 1987 (30, 60, 90 & 120 minute timber door-set)
• Dimensions: 266mm (Z)
• Dimensions: 185mm (L)
• Adjustable Z&L Brackets
• Product now has slots to improve and simplify the installation process, whilst enhancing the safety features of the product
• Has 4 points of secure fixing
• Magnet can now be slid into bracket to free up both hands to secure lock and bracket
• Z Bracket can extend by an additional 20mm to allow for door variations

KEY FEATURES

• Successfully fire tested to BS EN1634-1-2014 & BS476: Part 22: 1987 (30,60, 90 & 120 minute timber door-set)
• Dimensions: 532 x 73 x 46mm (L Bracket)
• Dimensions: 185 x 70 x 60mm (Z Bracket)
• L Bracket for use on outward opening doors
• ZL Bracket for use on inward opening doors
• Anodised aluminium finish
• Z Bracket can provide an extra 20mm-30mm of reach for non standard door settings
• Specially designed bracket slots that allows for a simple one person installation of double maglocks
• Fully adjustable brackets

KEY FEATURES

• Fire tested to BS EN1634-1-2014 & BS476: Part 22: 1987 (30, 60, 90 & 120 minute timber door-sets)
• ZL Bracket
• Dimensions: 180L mm (Z Bracket)
• Dimensions: 250L mm (L Bracket)
• Adjustable Z&L Bracket
• For use with the ML600 range of products
• Product now has added slots to improve and simplify the installation process, whilst enhancing the safety features of the product
• 4 points of secure fixing
• Magnet can be slid into bracket to free up both hands to secure lock and bracket
• Z bracket can extend by an additional 20mm to allow for door variations

KEY FEATURES

• Double pole contact N/O-N/C @ 30VAC/DC
• Touch free operation
• Adjustable timer (0.5 to 20 seconds)
• Adjustable distance (3 to 12cm)
• Designed for greater than 1 million operations
• Wear resistant legend
• Security screws (Allen key type)
• Includes audible/LED (selectable)
• Includes plastic covers which flip for operation
• 12/24V operation
• IP24 Rated 

KEY FEATURES

• Dimensions: 85 x 85 x 28mm
• Contacts: Changeover contacts
• Output: 10AMP contact @ 240V AC/DC
• Printed pad legend
• Retractable switch
• High impact plastic back box
• Internal use only
• Anti-bacterial certified: All RGL EBLS range of white moulded exit buttons are manufactured using Urea Formaldehyde, which destroys 99.9% of MRSA, E-Coli, Salmonella and Klebsiella Pneumoniae
• Anti-viral certified: All RGL EBLS range of white moulded exit buttons were shown to have a 99.9% kill off rate against developed viruses and a 92% kill off rate against non-enveloped viruses

KEY FEATURES

• Dimensions: 160 x 90 x 42mm
• Green dome button
• Double pole contact N/O-N/C @ 30VAC/DC
• High impact plastic back box (robust design)
• Water resistant legend
• Security screws (Allen key type)
• Includes audible/ LED (selectable)
• 12/24V operation
• IP24 Rated
• Screw footprint for surface fitting onto standard back box
• Includes plastic covers which flip for operation
• Designed for greater than 1 million operations

KEY FEATURES

• Dimensions: 85 x 85 x 32mm
• Contacts: Double pole NONC contacts
• Contact Load: 0.5A @ AC 120V / 1A @ DC24V
• 38mm Touch free sensor button
• Dual voltage 12/24 VDC @ 45mA operating
• Etched legend (various options available)
• Illumination - Green to red (or red to green)
• Security screws (Allen key type)
• Button rated IP65 ingress protection
• High impact plastic back box
• Ideal for general / sensitive areas
• Screw footprint for flush fitting onto standard back box
• Adjustable relay opening times (0.5 to 20 secs)
• Adjustable proximity distance (3 to 12cm)