Accessories

KEY FEATURES

• Dimensions: 225 x 196 x 75mm
• Compliant to EMC EN61000-6-1 & 3
• Full current to load
• 13.8VDC regulated output
• Switchmode technology
• LED indicators (mains, battery & output)
• Separate fused mains connections
• Full electronic protection
• On board tamper protection
• Converts power more efficiently (switch mode)
• Multiple cable entry (inc. rear)
• Additional battery charging
• Short circuit protection
• Can house a battery up to 12V 9Ah

KEY FEATURES

• Dimensions: 225 x 196 x 75mm
• Compliant to EMC EN61000-6-1 & 3
• LED Indicators (mains, batt, output)
• Full current to load
• Switchmode technology
• Constructed in a modular arrangement
• 13.8VDC regulated output
• Additional battery charging
• Current limiting
• Short circuit protection
• Onboard tamper protection
• 230V fused input
• Multiple cable entry
• Allows for 1 x 9aH batteries

KEY FEATURES

• Dimensions: 225 x 196 x 75mm
• Compliant to EMC EN61000-6-1 & 3
• LED Indicators (mains, batt, output)
• Full current to load
• Switchmode technology
• Constructed in a modular arrangement
• 13.8VDC regulated output
• Additional battery charging
• Current limiting
• Short circuit protection
• Onboard tamper protection
• 230V fused input
• Multiple cable entry
• Allows for 1 x 9aH batteries

KEY FEATURES

• Dimensions: 310 x 340 x 80mm
• Compliant to EMC EN61000-6-1 & 3
• Full current to load
• 13.8VDC regulated output
• Switchmode technology
• LED indicators (mains, battery, output)
• Separate fused main connectors
• Full electronic protection
• Multiple cable entry
• Current limiting
• Additional battery charging
• Allows for 1 x 9aH battery

• To suit 19mm pull handles

KEY FEATURES

• Dimensions: 200 x 200 x 65mm
• LED indicators for O/P, fault and mains
• Switchmode technology
• Multiple cable entry
• Cable retention points
• Ideal for hold open magnets and door closers
• Output can be fail-safe or fail-secure
• Dual inputs: external voltage or volt free
• Not to use with back up battery
• Full current to load
• 24-26VDC regulated output
• Short circuit protection
• Fused output
• Back EMF protection

• To suit 30mm Guardsman pull handles

KEY FEATURES

• 50mm x 8mm
• Supplied in pairs
• Aluminium Screw on rose cover
• Suitable for replacing or customising on a ZPA lever on rose
• NO plastic packaging

• Suitable for 19 and 22mm pull handles
• M8 x 65mm

• Suitable for 19 and 22mm pull handles
• M8 x 90mm

KEY FEATURES

• Turn & Release
• 50mm x 8mm sprung screw on zinc rose
• Fixing screws supplied
• 5mm spindle supplied

• Changes a 5mm spindle to an 8mm spindle
• For use on DIN lock spindles
• Plastic

• Changes a 5mm spindle to an 8mm spindle
• For use on DIN lock spindles
• Metal

KEY FEATURES

• Successfully fire tested to BS EN1634-1-2014 & BS476: Part 22: 1987 (30, 60, 90 & 120 minute timber door-set)
• Dimensions: 266mm (Z)
• Dimensions: 185mm (L)
• Adjustable Z&L Brackets
• Product now has slots to improve and simplify the installation process, whilst enhancing the safety features of the product
• Has 4 points of secure fixing
• Magnet can now be slid into bracket to free up both hands to secure lock and bracket
• Z Bracket can extend by an additional 20mm to allow for door variations

KEY FEATURES

• Fire tested to BS EN1634-1-2014 & BS476: Part 22: 1987 (30, 60, 90 & 120 minute timber door-sets)
• ZL Bracket
• Dimensions: 180L mm (Z Bracket)
• Dimensions: 250L mm (L Bracket)
• Adjustable Z&L Bracket
• For use with the ML600 range of products
• Product now has added slots to improve and simplify the installation process, whilst enhancing the safety features of the product
• 4 points of secure fixing
• Magnet can be slid into bracket to free up both hands to secure lock and bracket
• Z bracket can extend by an additional 20mm to allow for door variations

KEY FEATURES

• Dimensions: 124 x 32 x 43mm (Short Plate)
• Dimensions: 201 x 32 x 43mm (Long Plate)
• Ansi Style Electric Strike
• Use with access and door entry systems
• Holding force: 1500lb / 680kg
• 12VDC / 24VDC Selectable
• Current: 12V 280mA
• Current: 24V 140mA
• Suitable for metal / timber applications
• Fail Safe (Power to Lock)
• Fail Secure (Power  Open)
• Selected by adjustment at rear of unit
• Stainless Steel Plate (3mm Thick)
• Unbranded faceplates

KEY FEATURES

• Dimensions: 124 x 32 x 43mm (Short Plate)
• Dimensions: 201 x 32 x 43mm (Long Plate)
• Suitable for metal / timber applications
• Ansi Style electric strike
• Comes with short and long faceplate
• Short Plate: 124mm
• Long Plate: 201mm
• Use with access and door entry systems
• Holding force: 680kgs
• 12VDC/24VDC Selectable
• Current: 12V 280mA & 24V 140mA
• Fail Safe (Power to Lock)
• Fail Secure (Power to Open)
• Selected by adjustment at rear of unit
• Stainless steel plate (3mm Thick)
• Unbranded faceplates

KEY FEATURES

• Successfully fire tested to BS EN1634-1-2014 & BS476: Part 22: 1987 (30, 60, 90 & 120 minute timber door-set)
• Dimensions: 500 x 47 x 30mm (L Bracket)
• Dimensions: 250 x 50 x 55mm (Z Bracket)
• Specially designed bracket slots that allows for a simple one person installation of double maglocks
• L Bracket for use on outward opening doors
• ZL bracket for use on inward opening doors
• Anodised aluminium finish
• Fully adjustable brackets

KEY FEATURES

• Dimensions: 250 x 47 x 30mm (L Bracket)
• Dimensions: 250 x 50 x 55mm (Z Bracket)
• Fire tested to BS EN1634-1-2014 & BS476: Part 22: 1987 (30, 60, 90 & 120 minute timber door-sets)
• Specially designed bracket slots that allows for a simple one person installation of maglocks
• Fully adjustable brackets
• L Bracket for use on outward opening doors
• ZL bracket for use on inward opening doors
• Anodised aluminium finish

KEY FEATURES

• Dimensions: 84 x 40 x 41mm
• Key switch
• Latching operation
• Aluminium extrusion
• Security screws (Allen key type)
• Voltage free contacts
• 12-24VDC
• IP54 Rated
• Use for secure override
• Easy clean surface (ideal for public areas)
• Footprint for mounting onto flush back box
• Supplied with x 2 keys (606)
• 3 position key switch
• Etched legend (HOLD OPEN - OFF - AUTO)

KEY FEATURES

• Dimensions: 84 x 40 x 41mm
• Key switch
• Aluminium extrusion
• Security screws (Allen key type)
• Voltage free contacts
• 12-24VDC
• IP54 Rated
• Use for secure override
• Easy clean surface (ideal for public areas)
• Footprint for mounting onto flush back box
• Supplied with x 2 keys (2803)
• 2 Position key switch
• Etched legend (ON - OFF)

KEY FEATURES

• Successfully tested to BS EN1634-1-2014 & BS 476: Part 22: 1987 (30, 60, 90 & 120 minute timber door-set)
• Dimensions: 193 x 74 x 20mm
• Light and strong aluminium armature
• Multiple fixing holes for holding strength
• Supplied with fixing screws and armature securing bolt
• Removes the need to drill through the door
• The armature housing has been designed and fire tested to ensure that it retains the integrity of the the fire door after installation
• Removes the requirement to drill through the door to install the armature plate

KEY FEATURES

• Successfully fire tested to BS EN1634-1-2014 & BS476: Part 22: 1987 (30, 60, 90 & 120 minute timber door-set)
• Dimensions: 189 x 52 x 16mm
• Light and strong aluminium armature
• Multiple fixing holes for holding strength
• Supplied with fixing screws and armature securing bolt
• Removes the need to drill through the door
• The armature housing has been designed and fire tested to ensure that it retains the integrity of the fire door after installation
• Removes the requirement to drill through the door to install the armature plate

• 30 x 127mm
• Face-fix

• 45 x 77mm
• Face-fix

• 250mm / 10"
• Heavyweight

• 300mm / 12"
• Heavyweight

• 150mm / 6"
• Heavyweight

• 200mm / 8"
• Heavyweight

• 75mm / 3"
• Lightweight

• 100mm / 4"
• Lightweight

• 100mm

KEY FEATURES

• 150mm
• SS304

• 200mm

• 4" / 102mm
• Face-fix

• 6" / 152mm
• Face-fix

• 8" / 203mm
• Face-fix

• Single Hook
• Face-fix

• Single hook
• Face-fix

KEY FEATURES

• Rose diameter 50mm
• Rose projection 8mm
• Spindle size: 5mm
• Disabled RTD lever turn
• SS 304 Grade material
• Screw on stainless steel outer rose
• Also supplied with 20mm wood screws
• Fire tested suitable for 30 & 60 min timber doors
• Requires hex key ZCS000-HEX-KEY (sold seperately)

KEY FEATURES

• Rose diameter 52mm
• Rose projection 8mm
• Spindle size: 5mm
• Disabled turn
• SS 304 Grade material
• Push on stainless steel outer rose
• Also supplied with 20mm wood screws
• Fire tested suitable for 30 & 60 min timber doors
• Requires hex key ZCS000-HEX-KEY (sold seperately)

• 155 x 40mm
• Face-fix

• Concealed-fix
• Screw in

• Concealed-fix
• Screw in

KEY FEATURES

• BS EN 1634-1
• 14mm dia.
• 180 degree angle of vision
• Suitable for 35-55mm doors

• Treble Hook
• Face-fix

• Treble hook
• Face-fix

• Treble Hook
• BS EN 1634-1

KEY FEATURES

• Dimensions: 500 x 42 x 25mm (Maglock)
• Dimensions: 180 x 38 x 12mm (Armature x2)
• Fire tested to BS EN1634-1-2014 & BS476: Part 22: 1987 (30, 60, 90 & 120 min timber door-sets)
• 280kgs holding force x2
• Slimline mini magnet
• Power LED indication on ML600-D-M (Red to Green)
• Surface mount
• Fail safe operation (power to lock)
• Monitored
• Voltage free relay contacts

• Double Hook
• Face-fix

• Double hook
• Face-fix

• Double Hook
• Face-fix

• 51mm

KEY FEATURES

• Dimensions: 500 x 42 x 25mm (Maglock)
• Dimensions: 180 x 38 x 13mm (Armature x2)
• Successfully fire tested to BS EN1634-1-2014 & BS476: Part 22: 1987 (30, 60, 90 & 120 minute timber door-sets)
• Power LED indication (Red LED only)
• Aluminium housing
• 280kgs holding force x 2
• Dual voltage 12/24 VDC @ 480/340mA x 2
• Built in surge protection
• Fail safe operation (power to lock)
• Push off release pin on armature

KEY FEATURES

• Successfully fire tested to BS EN1634-1-2014 & BS476: Part 22: 1987 (30,60, 90 & 120 minute timber door-set)
• Dimensions: 532 x 73 x 46mm (L Bracket)
• Dimensions: 185 x 70 x 60mm (Z Bracket)
• L Bracket for use on outward opening doors
• ZL Bracket for use on inward opening doors
• Anodised aluminium finish
• Z Bracket can provide an extra 20mm-30mm of reach for non standard door settings
• Specially designed bracket slots that allows for a simple one person installation of double maglocks
• Fully adjustable brackets

KEY FEATURES

• Fire tested to BS EN1634-1-2014 & BS476: Part 22: 1987 (30, 60, 90 & 120 minute timber door-set)
• Dimensions: 250 x 48 x 25mm (L Bracket)
• Dimensions: 180 x 46 x 46mm (Z Bracket)
• Specially designed bracket slots that allows for a simple one person installation of double maglocks
• Fully adjustable brackets
• L Bracket for use on outward opening doors
• ZL Bracket for use on inward opening doors
• Anodised aluminium finish

KEY FEATURES

• Dimensions: 160 x 90 x 42mm
• Green dome button
• Double pole contact N/O-N/C @ 30VAC/DC
• High impact plastic back box (robust design)
• Water resistant legend
• Security screws (Allen key type)
• Includes audible/ LED (selectable)
• 12/24V operation
• IP24 Rated
• Screw footprint for surface fitting onto standard back box
• Includes plastic covers which flip for operation
• Designed for greater than 1 million operations

KEY FEATURES

• Double pole contact N/O-N/C @ 30VAC/DC
• Touch free operation
• Adjustable timer (0.5 to 20 seconds)
• Adjustable distance (3 to 12cm)
• Designed for greater than 1 million operations
• Wear resistant legend
• Security screws (Allen key type)
• Includes audible/LED (selectable)
• Includes plastic covers which flip for operation
• 12/24V operation
• IP24 Rated 

KEY FEATURES

• For use with flush bolts
• For use with concrete
• 20 x 25mm

• BS EN 1634-1
• 20 x 25mm

• BS EN 1634-1
• 20 x 35mm

KEY FEATURES

• For use with flush bolts
• For use with timber
• 20 x 38mm

• BS EN 1634-1
• Easy to clean
• 62 x 19mm

KEY FEATURES

• Dimensions: 100 x 100 x 120mm
• Extra deep enclosure for easy operation
• Prevents unwanted activation
• Gives extra protection from the elements
• Etched legend - EXIT BUTTON
• Wear resistant legend
• Internal or External use

KEY FEATURES

• Grade 304 stainless steel
• 75mm x 350mm
• Supplied with wood screws

KEY FEATURES

• Grade 304 stainless steel
• 75mm x 475mm
• Supplied with wood screws

KEY FEATURES 

• Solid brass
• 457 x 76mm fingerplate
• Non-handed
• Surface mounted
• Supplied with fixings
• To suit FB118 pull handles

• 55 x 120mm
• Face-fix

• Overall width - 366mm
• Outer frame - 247 x 80mm
• Aperture - 202 x 43mm
• Fixing centres - 226mm

KEY FEATURES

• Successfully fire tested to BS EN1634-1-2014 & BS 476: Part 22: 1987 (30, 60, 90 & 120 minute timber door-set)
• Dimensions: 318 x 60 x 32/57mm
• Allows adjustment and positioning
• Easy to fit and drastically reduces the installation time
• Simple to adjust magnet position
• No fixings required into the underside of transom
• Incorporates a cavity and cut out to make cabling easier
• Bracket to fix the transom
• 2 end guide channels for the plate to slide between
• Flat bar sliding plate to fix the magnet to
• Comes completely assembled

KEY FEATURES

• Successfully fire tested to BS EN1634-1-2014 & BS 476: Part 22: 1987 (30, 60, 90 & 120 minute timber door-set)
• Dimensions: 295 x 60 x 32/57mm
• Allows adjustment and positioning
• Easy to fit and drastically reduces the installation time
• Simple to adjust magnet position
• No fixings required into the underside of transom
• Incorporates a cavity and cut out to make cabling easier
• Bracket to fix the transom
• 2 end guide channels for the plate to slide between
• Flat bar sliding plate to fix the magnet to
• Comes completely assembled

KEY FEATURES

• Concealed-fix rose
• 50mm dia. rose
• 82mm centre line projection
• Fixings included

KEY FEATURES

• 55mm rose dia.
• 80mm rose projection

KEY FEATURES

• Dimensions: 85 x 85 x 32mm
• Contacts: Double pole NONC contacts
• Contact Load: 0.5A @ AC 120V / 1A @ DC24V
• 38mm Touch free sensor button
• Dual voltage 12/24 VDC @ 45mA operating
• Etched legend (various options available)
• Illumination - Green to red (or red to green)
• Security screws (Allen key type)
• Button rated IP65 ingress protection
• High impact plastic back box
• Ideal for general / sensitive areas
• Screw footprint for flush fitting onto standard back box
• Adjustable relay opening times (0.5 to 20 secs)
• Adjustable proximity distance (3 to 12cm)

• Double Hook
• Face-fix

• Double hook
• Face-fix

• 125mm / 5"

• Double hook
• Face-fix

• Double Hook
• 20 x 177mm
• Face-fix

KEY FEATURES

• Double hook
• 18 x 145mm
• Face fix
• Heavy duty 4mm thick

• Hat & coat hook
• Comes with rubber buffer
• Face-fix

• BS EN 1634-1
• 200mm chain length

KEY FEATURES

KEY FEATURES

• Dimensions: 87 x 87 x 60mm
• Double pole
• x 1 Pole (Positive switching)
• x 1 Pole (Changeover contact)
• Internal Use
• Includes audible/LED (selectable)
• 12/24V operation
• Voltage 12/24 VDC @ 30/45mA
• IP24 Rated
• Resettable
• Easy clean surface (ideal for hospitality areas)
• Screw footprint for surface fitting onto standard back box
• Key reset operation (not replacement glass)
• Emergency Door Release - permanently lit (changes to red on activation/alarm)
• Includes plastic front covers which flip up for operation

KEY FEATURES

• Dimensions: 125 x 79 x 46mm
• Heavy duty vandal resistant
• Stainless steel face plate and keys
• Backlit keys
• 12V-24VDC max 150mA
• Visitor code programming
• Latch/toggle function
• Door inter-lock function
• Easy to wire and programme
• 4-8 digit codes
• Over 100 million pin combinations
• IP66 rated

KEY FEATURES

• Dimensions: 120 x 76 x 25mm
• Keypad only
• Single or dual modes using aux output
• Individually programmable outputs
• Adjustable output timers on both lock and aux
• Zinc alloy electroplated casing
• 500 unique users
• Selectable backlit features
• 2 open door modes
• 4 digit pin

KEY FEATURES:

• Dimensions: 120 x 76 x 25mm
• Uses EM cards or fobs
• Built in prox reader
• Keypad or prox
• Single or dual modes using aux output
• Individually programmable outputs
• Adjustable output timers on both lock and aux
• Zinc alloy electroplated casing
• Selectable backlit features
• 2 open door modes
• 4 digit pin
• 500 unique users

KEY FEATURES

• 125kHz
• 26-bit EM Cards & Keyfobs
• Available in blue or grey

• 64 x 190mm
• Face-fix
• Works with FF600 - Ring handle

• Outer frame - 304 x 102mm
• Aperture - 200 x 40mm
• Fixing centres - 235mm

• 340 x 76mm
• Aperture - 280 x 45mm
• Bolt through 312mm c/c

• 345 x 75mm

• 305 x 76mm

• 355 x 102mm

KEY FEATURES

• Dimensions: 46 x 40mm
• LED Indication
• Outputs linked via the common connection
• Mini switching relay
• Low current input @ 12VDC
• 9-20VDC
• Current 44mA
• Contact rating 5A @ 250VAC or 30VDC
• 2 x COM - NO-NC